Klarstein BARELLA Manual página 30

EN
30
Replacing the bulb
• The bulb must be replaced by the manufacturer, its customer service or similarly
qualified persons.
• Always turn off the power before performing any work on the unit. When handling
the bulb, make sure it is completely cool before touching it directly with your hands.
• When inserting or removing the bulb, always hold it with a cloth or gloves to ensure
that sweat does not come into contact with the bulb, as this may shorten the life of
the bulb.
How to replace the bulb:
1. Before changing the bulb, make sure that the hood is off.
2. Turn the cover counterclockwise. Loosen the screw of the stainless steel filter and
remove it.
3. Press the bulb connector to remove the bulb.
4. Install the new bulb and reconnect the cable.
Important information about the bulb type
LED type: round glass lamp
Maximum wattage: 2 x 1 W
Voltage range: DC 4V
Dimensions: see picture