Asafety Instructions - Qlima SPHP 130 Instrucciones De Uso

SAFETY INSTRUCTIONS
A
Install this device only when it complies with local/nation-
al legislation, ordinances and standards. This product is
intended to be used as a pool heat pump for residential
pools. Check the mains voltage and frequency. This unit is
only suitable for earthed sockets, connection voltage 220-
240 V~ / 50 Hz.
IMPORTANT
• The device MUST always have an earthed
connection. If the power supply is not earthed, you
may not connect the unit. The plug must always
be easily accessible when the unit is connected.
Read these instructions carefully and follow the
instructions.
• The pool heat pump contains a refrigerant and can
be classified as pressurized equipment. Therefore
always use an authorized air conditioning engineer
for maintenance of the pool heat pump.
Before connecting the unit, check the following:
• The voltage supply must correspond with the mains volt-
age stated on the rating label.
• The socket and power supply must be suitable for the cur-
rent stated on the rating label.
• The plug on the cable of the device must fit into the wall
socket.
• The device must be placed on a stable surface.
The electricity supply to the device must be checked by a
recognised professional if you have any doubts regarding
the compatibility.
• This device is manufactured according to CE safety stand-
ards. Nevertheless, you must take care, as with any other
4
52