Boynq WAKE UP Manual página 6

Manual WakeUp™
Wake up with iPod:
1) On your iPod select the song, album or playlist you would like to wake up with
and press play. If you select the last number of an album or playlist, please
place the iPod in repeat mode to ensure the Alarm will keep playing music.
2) Put the iPod in Pause/Sleep mode (hold down play/pause button) and insert into
the WakeUp .
TM
3) The WakeUp can be put to sleep by pressing the on/off button.
TM
Please ensure the Alarm audio source is set to iPod.
To wake up with a buzzer sound, please select AUX as Audio source for the
Alarm.
Sleep:
Press SLEEP until Sleep flashes in the display and adjust the preferred sleep time by
pressing HOUR and MIN. Press Sleep to confirm the sleep timeout and sleep will be
highlighted in the display to indicate the function is activated. Press SLEEP to deactivate
the sleep function.
Good to know!
• Recharging: the iPod will recharge when docked in the WakeUp
and automatically when the USB docking cable is attached to the WakeUp
• Synchronization: To use the WakeUp
please connect the original iPod USB docking cable (30-pin dock connector) to the
WakeUp and the computer. No extra software, besides iTunes and iPod software is
TM
needed. Once the iPod is inserted into the WakeUp
recognize the iPod.
• Line-in: Auxiliary sound devices such as iPod shuffle/ MP3 players/ MiniDisc or CD
players, can be connected to the WakeUp
WakeUp .
TM
• Line-out: simply connect the supplied line-out cable to the line-out connection on the
WakeUp and to a Line-in connection on your Home Stereo.
TM
Specifications:
• Made for iPod Stereo Speaker & Alarm clock.
• FM Radio with auto scan feature and 9 Memory Presets.
• Alarm clock, wake up to your favourite iPod tune, Radio or buzzer.
• Remote control with Snooze button.
• Docking station for recharging the iPod.
• Docking station for data synchronization via USB.
• Enhanced 2 x 10W RMS full range drivers (3").
• Crisp, clear, powerful and distortion free high quality Audio.
• Treble and Bass EQ control for optimal sound control.
• Including 6 different docking inserts to fit all iPod models.
• Stereo line-in connection for iPod shuffle and auxiliary audio devices (cable included).
• Stereo Line-out for connection to home stereo, (cable included).
• Magnetically shielded against High Frequency (mobile phone) interference.
• Power adaptor input 100~240V, 18V DC/ 1.33A output.
• Frequency range 20Hz – 20KHz.
• Weight: 980 gr.
• Dimensions: 165x145x150
* actual product specifications may vary for technical reasons
6
All manuals and user guides at all-guides.com
english
on the AC adapter
TM
TM
as data synchronization docking station,
TM
, the computer will automatically
TM
Line-in connector at the back of the
TM
Manual WakeUp™
Remote Control
The Remote Control allows you to control not only the basic functions of the WakeUp
but also gives you the freedom to remotely snooze the Alarm! The Snooze button is the is
the central control of the WakeUp
Remote control Buttons:
1) Snooze / play / pause / Power
2) Volume Up
3) Volume Down
4) Previous
5) Next
Remote Control Operation:
• Turn on/off the WakeUp™:
Keep the Snooze button pressed for 5sec to turn the WakeUp
WakeUp to sleep.
TM
• Change volume:
Press Volume+ or Volume - to change the volume output of the WakeUp
accordingly (please note volume ranges from 00-40)
.
• Snooze the Alarm:
When the Alarm sounds, press Snooze to activate snooze mode. During 'snooze' the
word alarm will blink to indicate the Alarm is still active. Press ALARM/SET to cancel
the alarm, the word Alarm will also disappear from the display. Standard Snooze
time is 9 min
• iPod playback specific controls:
• Snooze: will play or pause the iPod
• Previous: skip to the previous track on the iPod (album or playlist). Keep pressed
to rewind within the song
• Next: skip to the next track on the iPod (album or playlist). Keep pressed to fast-
forward within the song.
• Radio playback:
• Snooze: will mute the sound, when the sound is muted the volume indicator on
the Display LCD will flash
• Previous & Next: press to cycle through the programmed Radio
• Aux (line-in) playback:
• Snooze: will mute the sound, when the sound is muted the volume indicator on
the Display LCD will flash
Replacing the Remote battery
The Remote Control Battery is already installed. When the Remote Control stops
operating or its range seems reduced, it is time to replace the battery with a new one.
1) Take the battery holder from the Remote Control (located at the back)
2) Discard the empty battery in the appropriate manner and place a new CR2032
– 3V Lithium Battery, please ensure the polarity of the battery is correct (+ side
should be facing up)
3) Insert the battery holder back into the Remote Control.
remote.
TM
on or to put the
TM
channels.
english
,
TM
TM