PowerLocus Buddy Manual De Usuario página 2

d. Connect two devices at the same time: Remark: When you need to connect the headphone with two bluetooth devices at the
same time, you need to connect with both of the devices first.
2) Answer Call: Short press
3) Hang up phone calls:Short press
4) Reject Calls:Long press
5) Redial the last number: Double-click
6) Music Play:Short press
Micro SD Card playback Mode:
1) When the slot is empty, inserted the Micro SD Card, voice prompts "music". Then it plays media automatically.
2) When the Micro SD Card is inside, switch to TF Mode through "M".
Blinking lights on/off switch:
When the headphone is on, turn on or off the breathing lights by long pressing "M".
Line-in Mode:
When the headphone is on, insert the Aux-in cable, voice prompts "Line-in Mode". Then it plays smart device's media
automatically.
1. Maximum/ minimum volume warning voice prompts "du du".
2. Supports MP3, WAV format playback.
3. Battery indication on IOS.
4. Micro USB as common use charging port.
LED indicator light Status:
Charging Status Steady red LED. When fully charged, the blue LED indicator light turns on.
Power on Status
Power off Status
Pairing Status
Standby Status
Connected Status
Using Status
Note:
If no pairing connection after the Bluetooth headphone enters the pairing mode, please turn off the headphone as for power saving.
Do not perform other operations when searching Bluetooth to prevent the program error.
Please select the appropriate volume in use to prevent damage to your ears.
Please note that a good environment while using the Bluetooth headphone can avoid damage to the product.
Please charging the headphone after a long time none-use.
when call is coming.
after calling.
.
.
after connected with the smart device.
Blue LED indicator light turns on.
LED indicator light turns off.
Blue and green LED indicator lights rapidly alternating flash.
Blue LED indicator light turns on.
Blue LED indicator light turns on.
Bluetooth Mode , Blue LED indicator light flashes slowly.
TF Mode, green LED indicator light flashes slowly.
Line-in Mode, the headphone automatically turns off, LED light turns off.