Better Homes and Gardens Maddox Crossing BH16-021-199-09 Instrucciones De Montaje página 4

1
Flat Washer
(3 used in this step)
③
Lock Washer
(3 used in this step)
②
M6 x 35 mm Bolt
(3 used in this step)
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place the Nightstand Top (A) upside down on a level and protective surface. Pull the drawer all the way
forward for the following steps (remove the drawer completely, if necessary).
3. Attach one Leg (B) to the Nightstand Top (A) with three 35 mm Bolts (1), three Lock Washers (2) and
three Flat Washers (3).
All manuals and user guides at all-guides.com
Assembly Instructions
2 3
①
DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are
DO NOT fully tighten the bolts.
A
4
B