Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION! Please transport the UPS only in the original package to protect against shock and
impact.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area free of conductive contaminants. (See the specifications for the
acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and
avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances
such as space heaters or furnaces.
CAUTION! Do not attach non-computer-related items, such as medical equipment,
life-support equipment, microwave ovens, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Condensation may occur if the UPS system is moved directly from cold to warm
environment. The UPS must be absolutely dry before being installed.
CAUTION! Place cables in such a way that no one can step on or trip over them.
CAUTION! The mains socket outlet that supplies the UPS shall be installed near the UPS and
shall be easily accessible. The UPS power cord must be connected to an earthed mains socket
outlet for safety reasons.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages
or any other liquid-containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the power
cord from the AC power supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! If the UPS is with metal chassis, for safety purpose, grounding is a must during
UPS installation in order to reduce leakage current below 3.5mA.
Attention hazardous through electric shock. Also with disconnection of this unit from the
mains, hazardous voltage still may be accessible through supply from battery. The battery
supply should be therefore disconnected in the plus and minus pole at the quick connectors of
the battery when maintenance or service work inside the UPS is necessary.
CAUTION! Servicing of batteries should be performed or supervised by personnel
knowledgeable of batteries and the required precautions. Keep unauthorized personnel away
from batteries.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Avoid touching eyes while working near batteries.
CAUTION! Have plenty of fresh water and soap nearby in case battery acid contacts skin,
clothing, or eyes.
CAUTION! Do not disassemble the unit before contact with the qualified service center when
service or repair is required.
CAUTION! To reduce risk of injury, only use qualified batteries from qualified distributors or
manufacturers. Any unqualified batteries may cause damage and injury. Do NOT use old or
overdue batteries. Please check the battery type and date code before installation to avoid
damage and injury.
CAUTION! Internal battery voltage is 12VDC. Sealed, lead-acid, 6-cell battery.
____________________________________________________
LA-ITR-SH (V.1.2 2019)
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or
mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! A battery can present a risk of electric shock and high short circuit current. The
following precaution should be observed before replacing batteries:
1)
Remove watches, rings, or other metal objects.
2)
Use tools with insulated handles.
3)
Wear rubber gloves and boots.
4)
Do not lay tools or metal parts on top of batteries.
5)
Disconnect charging source prior to connecting or disconnecting batteries terminal.
4. Software Download & Installation (Only for the model with
communication port)
Please follow steps below to download and install monitoring software:
1. Go to the website http://www.power-software-download.com
2. Click ViewPower software icon and then choose your required OS to download the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
5. Trouble Shooting
Use the table below to solve minor problems.
Problem
Possible Cause
No words display on the
AC input is not connected
front panel even though
well.
the mains is normal.
AC input is connected to the
UPS output.
Battery backup time is
Batteries are not fully
shorter than nominal
charged.
value.
Batteries defect.
Warning or fault icon is
Fan is locked or not working. Check fans and notify your dealer.
shown and alarm is
The UPS is overload.
continuously sounding.
Low battery icon is shown
Low battery.
on the LCD screen.
_________________________________________________
Solutions
Check if the input power cord is firmly
connected to the mains.
Plug AC input power cord to AC input
correctly.
Charge the batteries at least 6 hours
and then check the capacity again.
If the problem still persists, please
consult your dealer.
Contact your dealer to replace the
batteries.
Remove some loads first. Before
reconnecting devices, please verify the
total loads match the UPS capability
specified in the spec.
Charge the UPS at least 6 hours.
LA-ITR-SH (V.1.2 2019)
Publicidad
