Electric Installation; Circuit Breaker - Electrolux GC58V Manual De Instrucciones

Installation with a central gas
system
The central gas and defined building area
containing transportable or stationary containers
and accessories intended for the storage of gas
consumption.
In a installation with central gas there are some
important points:
1- Stationary cylinder or cylinders portable
battery;
2- 1 level regulator;
st
3- 2 nd level regulator;
4- Consumption meter.
To install your cooker to the central gas, check
if your home has a unique wall gas valve for the
kitchen, in a good working condictions and follow
according to the previous item.
IMPORTANT
Always use a pressure regulator to any
type of gas cylinder. Its absence can cause
excess of gas pressure and leaks. Check
the expiry date of the pressure regulator
and hose.

Electric installation

For your safety ask to an
electrician to check the condition
of the electric network of the
installation place or o contact the
Electrolux Service Station.

Circuit Breaker

It is recommended to use a 2A circuit breaker. The
circuit breaker installation location should be close to
the device (about 5 meters). If the distance is more
than 5 meters, ask a trusted electrician to make the
adjustments.
Before connecting, make sure:
- That the gas redactor and domestic installation can
support the unit load, according to its characteristics.
- The socket or circuit breaker used for connection is
easily accessible, even after the product installation.
- The power cord is placed so that it does not touch
the hot parts of the product, as it may occur the
melting of the electrical insulation, resulting in short
circuit.
- When there is an oven installed under the cooktop,
the product power cord can not be in contact with the
back of the oven.
22
Before connecting, be sure:
- The plug or circuit breaker used for connection
are easily accessible, even after having installed
the cooker;
- The power cord must be so never touch the hot
walls of the cooker, as they can melt the electrical
insulation and cause short circuit;
- Do not use extensions or connectors;
- Never connect the ground wire to gas or PVC
pipes;
- Properly install the ground wire of your cooker
according to local regulations;
- If in doubt, consult an electrician.
Voltage Minimum
Ground wire
If your cooker has a ground wire (green or green/
yellow) near the power cable, it must be connected
to a suitable grounding point.
Do not connect the ground wire to taps, water,
electric or gas pipelines or to the network neutral
cable.
If your product has a 3 pin plug, use the appropriate
grounding plug. You must not cut grounding pin of
the plug. For your safety, ask an electrician to install
the ground wire in your residence.
Maximum