Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GBH 18V-26 Professional Manual Original

18 | English
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic

Technical Data

Cordless rotary hammer
Article number
Speed control
Stop rotation
Clockwise/anticlockwise rotation
Quick-change chuck
1 609 92A 6GA | (10.02.2022)
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck (GBH 18V-26 F)
(2) SDS plus quick-change chuck (GBH 18V-26 F)
(3) SDS plus tool holder
(4) Dust protection cap
(5) Locking sleeve
(6) Locking ring for quick-change chuck
(GBH 18V-26 F)
(7) Vibration damping
(8) EPC switch (Electronic Precision Control)
(9) Mounting for suspension strap
a)
(10) Battery release button
(11) Rotational direction switch
(12) Handle (insulated gripping surface)
(13) On/off switch
a)
(14) Battery
(15) Release button for impact/mode selector switch
(16) Impact/mode selector switch
(17) Worklight
(18) Button for depth stop adjustment
(19) Auxiliary handle (insulated gripping surface)
(20) Depth stop
(21) Securing screw for keyed chuck (GBH 18V-26)
(22) Keyed chuck (GBH 18V-26)
(23) SDS plus shank for drill chuck (GBH 18V-26)
(24) Drill chuck holder (GBH 18V-26 F)
(25) Identification grooves
(26) Chuck key (GBH 18V-26)
(27) Front sleeve of the keyless quick-change chuck
(GBH 18V-26 F)
(28) Retaining ring of the keyless quick-change chuck
(GBH 18V-26 F)
(29) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GBH 18V-26
3 611 J09 0..
●
●
●
–
a)
a)
a)
a)
GBH 18V-26 F
3 611 J10 ...
●
●
●
●
Bosch Power Tools