Sonos ZonePlayer ZP80 Guía De Configuración página 8

4
1-2-3 Setup
Note: The first ZonePlayer you install must connect to your home network using a
standard Ethernet cable (supplied). If you should experience any difficulty during
the setup process, please go to www.sonos.com/support for additional help.
If you are setting up a new Sonos system
Attach the power cord and plug in the ZonePlayer ZP80.
1
Connect a standard Ethernet cable (supplied) from either of the two (2) Ethernet switch
2
connectors on the back of your ZonePlayer ZP80 to an open port on your router (see A in
the diagram below). Do not connect the ZonePlayer directly to your cable or DSL modem
unless your modem has a built-in router.
• If you don't have a router, go to http://faq.sonos.com/norouter for instructions.
Cable/DSL
modem
• If you don't have an open port on your router, you can disconnect your computer from
the router and connect it to the ZonePlayer ZP80 instead. Then connect the ZonePlayer
into the router port the computer was previously plugged into.
All manuals and user guides at all-guides.com
Structured
Wiring
Router
Sonos ZonePlayer ZP80 Setup Guide
If you have
structured (built-in)
wiring, you can
connect the Ethernet
cable into a live wall
plate (see B in the
diagram).
Cable/DSL
modem
Router