Adjusting the visor, fig . J
You can adjust the distance between the visor
and your face by moving the visor manually (see
fig . J) .
Alternatively, you can flip the visor
up .
Maintenance, cleaning, storage
and transportation
■
Examine the components for damage and signs
of wear before each use .
■
Always clean the helmet after finishing your
work .
■
Use a moistened cloth to clean the helmet, ear
protectors and visor . Never use petrol, solvents
or cleansers which can damage plastic .
■
To disinfect the helmet and ear protectors, use
only cleaning agents that do not contain sol-
vents or aggressive substances .
■
Store the helmet, ear protectors and visor in a
clean, dry environment away from UV rays .
■
The helmet can be transported in the box in
which it was sold .
Durability
■
The materials used for the helmet age naturally .
Only use the helmet for a maximum period of
5 years .
Please refer to the fold-out page (fig . M) for
the date of manufacture . The same symbol is
imprinted into the helmet .
FFSH 3 A1
All manuals and user guides at all-guides.com
all the way
Disposal
Dispose of the product via an approved
waste disposal company or your munici-
pal waste disposal facility . Observe the
currently applicable regulations . Please contact
your waste disposal facility if you are in any doubt .
Dispose of all packaging materials in an environ-
mentally friendly manner .
Service
Service Great Britain
Tel .: 0871 5000 720 (£ 0 .10/Min .)
E-Mail: kompernass@lidl .co .uk
Service Ireland
Tel .: 1890 930 034
(0,08 EUR/Min ., (peak))
(0,06 EUR/Min ., (off peak))
E-Mail: kompernass@lidl .ie
IAN 292272
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www .kompernass .com
GB │ IE
│
11
■