Publicidad
Idiomas disponibles
Idiomas disponibles
-Move at a speed of about 1 minute every 10 sq ft
and follow the diagram for an even finish (Fig.10)
-Move at a speed of about 1 minute every 10 sq ft
and follow the diagram for an even finish (Fig.10)
-Do not sweep the polisher from side to side.
-Do not sweep the polisher from side to side.
-Do not leave the product operating in one area
for a prolonged period as this may damage your
-Do not leave the product operating in one area
floor
for a prolonged period as this may damage your
floor
-Once cleaning is complete, turn the unit off by
returning it to its upright position. Polishing /
-Once cleaning is complete, turn the unit off by
buffing the floor
returning it to its upright position. Polishing /
buffing the floor
-Clean floor thoroughly first before adding your
chosen floor polish / wax
-Clean floor thoroughly first before adding your
chosen floor polish / wax
-If you are using an alternative floor polishing
wax or oil to Ewbank® Floor Polish, please refer
-If you are using an alternative floor polishing
to the manufacturer's instructions when using
wax or oil to Ewbank® Floor Polish, please refer
with the Ewbank® 4-in-1 Floor Cleaner,
to the manufacturer's instructions when using
Scrubber Polisher & Vac
with the Ewbank® 4-in-1 Floor Cleaner,
Scrubber Polisher & Vac
-Start with the blue cleaning pads initially and
buff to a finish with the yellow pads for a
-Start with the blue cleaning pads initially and
high-sheen finish
buff to a finish with the yellow pads for a
high-sheen finish
-Keep the polisher moving, do not stop in one
place for a long time or it will spoil the finish
-Keep the polisher moving, do not stop in one
place for a long time or it will spoil the finish
-Once polishing is complete, turn the unit off by
returning it to its upright position
-Once polishing is complete, turn the unit off by
returning it to its upright position
-A glossy finish may not always be possible; this
depends on the polish/wax used and the type of
-A glossy finish may not always be possible; this
floor surface. Sometimes several coats of polish
depends on the polish/wax used and the type of
will enable a glossy finish.
floor surface. Sometimes several coats of polish
will enable a glossy finish.
Power Cable Storage
Power Cable Storage
-The electrical power cable can be stored on the
rear of the product using the convenient power
-The electrical power cable can be stored on the
cable storage hooks
rear of the product using the convenient power
cable storage hooks
Fig.10
Fig.10
(approx. 1minute per 10 sq ft
6
6
6
3.3ft
3.3ft
(approx. 1minute per 10 sq ft
3.3ft
3.3ft
)
)
Publicidad
