Descargar Imprimir esta página

Panasonic EY3654 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
4EN) 05.04.01 11:43 ページ 8
arging
TE:
en you charge the battery pack for the
time, or after prolonged storage, charge
r about 24 hours to bring the battery up
ull capacity.
tery charger (EY0110)
lug the charger into the AC outlet.
TE:
arks may be produced when the plug is
erted into the AC power supply, but this
ot a problem in terms of safety.
nsert the battery pack firmly into the
harger.
ery pack
$
To AC outlet
#
Battery charger
During charging, the charging lamp will
e lit.
When charging is completed, an internal
lectronic switch will automatically be
iggered to prevent overcharging.
Charging will not start if the battery
pack is warm (for example,
immediately after heavy-duty
operation).
The orange standby lamp will be lit
until the battery cools down. Charging
will then begin automatically.
When charging is completed, the
harging lamp will start flashing quickly
n green color.
MP INDICATIONS OF THE EY0110
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange Flashing
All manuals and user guides at all-guides.com
5. When in any of the conditions that
battery pack is too cool, or the battery
pack has not been used for a long time,
the charging lamp is lit. In this case,
charging takes longer to fully charge the
battery pack, than the standard
charging time.
• If a fully charged battery pack is
inserted into the charger again, the
charging lamp light up. After several
minutes, the charging lamp may flash
quickly to indicate the charging is
completed.
6. If the charging lamp does not light
immediately after the charger is plugged
in, or if after the standard charging time
the lamp does not go off, consult an
authorized dealer.
NOTE:
• When charging a cool battery pack
(below 5°C (41°F)) in a warm place,
leave the battery pack at the place and
wait for more than one hour to warm up
the battery to the level of the ambient
temperature. Otherwise battery pack
may not be fully charged.
• Cool down the charger when charging
more than two battery packs
consecutively.
• Do not insert your fingers into contact
hole, when holding charger or any other
occasions.
CAUTION:
• Do not use power source from an engine
generator.
• Do not cover vent holes on the charger
and the battery pack.
• Unplug the charger when not in use.
Charger is plugged into the AC outlet.
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will begin
when temperature of battery pack drops.
Charging is not possible. Clogged with
dust or malfunction of the battery pack.
8
Maintenance
CAUTION:
Make sure to remove the battery pack
before starting maintenance work or when
checking the tool.
BWipe the tool with a soft, dry cloth.
BDo not use a wet cloth or solvents, since
this may discolor the housing.
SPECIFICATIONS
Battery-powered sealing gun with speed regulator
Model
EY3654
Motor
DC Motor 7.2 V
Ejection pressure
2500 N (250 kgf)
Length overall
max. 892 mm
(35") min. 550 mm (22")
Weight (incl. Battery pack)
2.1 kg (4.6 lbs)
Battery pack
Model
EY9066
Storage Battery
Ni-Cd battery
7.2 V DC (1.2 V × 6 cells)
Battery Voltage
Battery charger
Model
EY0110
Electrical rating
See the rating plate on the bottom of the charger.
Weight
0.78 kg (1.72 lbs)
7.2 V
EY9065
EY9080
EY9066
EY9086
1.2 Ah
20 min.
EY9180
EY9182
1.7 Ah
Charging Time
EY9168
2.0 Ah
30 min.
3.0 Ah
3.5 Ah
NOTE:This chart may include models that are not available in your area.
Please refer to the catalogue.
BIf sealing compound adheres to the
rack, remove the compound before it
hardens.
Inspect and clean the tool in regular
intervals. Charge the battery pack at least
every 6 months.
Do not disassemble the tool.
Should any repairs become necessary,
contact the dealer where you bought the
tool or consult an authorized service
center.
EY3654 is designed to use only battery pack
type EY9066. Use with other battery pack may
damage the tool and battery pack and may result
in the risk of fire and personal injury.
9.6 V
12 V
15.6 V
18 V
EY9001
EY9006
EY9101
25 min.
EY9106
EY9136
30 min.
EY9200
EY9230
45 min.
EY9201
EY9231
EY9251
55 min.
65 min.
9
24 V
EY9117
60 min.
EY9210
90 min.

Publicidad

loading