Switch Names And Functions - Hitachi PC-ARFG-E Manual De Instrucciones

Switch Names and Functions

: Auto swing operation will be started.
At this time, the louver icon on the LCD
will keep swinging repeatedly.
?
N O T E
• For the indoor unit without the auto louver
mechanism, the indication of "Louver" is NOT
displayed on the LCD.
5 SWITCH NAMES AND FUNCTIONS
Temperature Set
Indicator
Mode Indicator
Fan Speed
Indicator
Run Indicator
On/Off Button
?
N O T E
• The complete information about the purchased products is supplied in a CD-ROM, which can be found
bundled with the outdoor unit. In case that the CD-ROM is missing or it is not readable, please contact
your Hitachi dealer or distributor.
• The backlight turns off 10 minutes after the last operation. If you press any switch, the backlight is
turned on. (The switch pressed to turn on the backlight is not functional.)
• Make sure to press the buttons lightly with your fingertips.
• Do NOT press the buttons or anything with sharp points, such as a ball point pen. The operational
functionality of the controller may become damaged.
7 PMML0564 rev.1 - 09/2021
• The air flow angle is different for each indoor
unit type. Check for detailed information in each
Operation Manual for indoor unit.
• The l ouver p osition o n t he L CD a nd t he a ctual l ouver
position may not match during the Auto-Swing.
To set the louver positions, set the angle after
checking the position on the LCD.
• The louver may NOT stop immediately after the
switch is pressed.
Directional Key
Room Name
Indicator
Louver Swing
Indicator
Menu Indicator
OK Button
Back Button