Bluetooth Playback - EDIFIER MP100 Plus Manual

■ Operating instructions
●

Bluetooth playback

1. When the speaker is powered on,
select "EDIFIER MP100 Plus" in your
device setting to connect.
2. After the connection is successful, the
speaker will emit a prompt, then start playing music.
● Bluetooth hands-free phone function
When there is a Bluetooth connection between the
phone and the speaker, and there is an incoming call:
• Press and hold "
• Press " " to answer, then press to end a call
• When calling, press and hold "
Note:
1. Please make sure your device supports A2DP (Advanced Audio Distribution Profile) /
HFP (Handsfree Profile) profiles.
2. Pin code for connection is "0000" if needed.
■ LED instructions
Status
Bluetooth pairing
Bluetooth connected
Bluetooth hidden
Power off
Note:
1. When the speaker enters the Bluetooth hidden state, it cannot be connected with
the mobile phone.
2. Press the Bluetooth switch to enter the Bluetooth pairing state and then connect.
" to reject a call
" to transfer the call to the phone
Charging
Blue LED blinks rapidly
Red LED steady lit
Red LED blinks slowly
Red LED steady lit
Non-charging/
fully charged
Blue LED blinks rapidly
Blue LED steady lit
Blue LED blinks slowly
/