Safety Instructions; General Power Tool Safety Warnings - VONROC JR501DC Traducción Del Manual Original

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fi re and/or serious injury.
Keep the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
and on the appliance:
Read the user manual
Denotes risk of personal injury, loss of life
or damage to the appliance in case of
non-observance of the instructions in this
user manual.
Do not use in rain.
Remove the battery from the device before
you dispose of it. Batteries must never be
disposed of in your household waste. Being
the end user, you are obliged to return used
batteries. You can return used batteries
free-of-charge to the point of sale or its
immediate vicinity (e.g. municipal collecting
points or in shops).
The product complies with the applicable
safety standards in the European directives.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fi re and/or serious injury.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
WWW.VONROC.COM
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Do not use the jobsite radio if the power switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
b) Disconnect the battery pack from the jobsite
radio when it is not in use.
c) Keep the jobsite radio out of the reach of
children and do not allow persons unfamiliar
with the radio or these instructions to operate
the radio.
d) Use the jobsite radio and accessories in
accordance with these instructions. Use of
the radio for operations different from those
intended could result in a hazardous situation.
4) Battery tool use and care
a) Recharge only with the charger specifi ed by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fi re
when used with another battery pack.
b) Use power tools only with specifi cally
designated battery packs. Use of any other
battery packs may create a risk of injury and
fi re.
5