Replacing The Filter - UFESA PF6500 CLEAN AIR CONNECT Manual De Instrucciones

L: low wind speed
H: high wind speed
M: medium wind speed
Auto: auto wind speed in the condition of working
Press the wind speed button, the buzzer will ring for one time.
Press again to adjust the wind speed among the circulation of Auto, low, medium and high grade with
buzzer rings, the corresponding indicator will be on.
(The wind speed adjustment key can be adjusted when the machine is not turned o ) The machine has
the function of automatically adjusting the gear position, built-in automatic sensor, and the night light
function is turned on. The lighting displays the current ambient air quality.
The brightness of the lighting can be adjusted.
- Green represents good air quality
- Yellow represents average air quality
- Red represents poor air quality.
Adjust the wind speed to the automatic function: the machine will automatically change the wind speed
according to the quality of the air. When the air quality is poor, the wind speed will be high. When the air
quality is normal, the wind speed will automatically be changed to medium speed and then switch to low
speed.
Light control (d)
When the appliance is on, press the lighting button, the buzzer will ring for one time and the LED light will
be turn into soft mode.
Press again, the light will turn into standard mode.
Press again, the light will turn into o . (In the condition of shutdown, the light could not adjust.).
In the condition of working, press this button about 3s, can turn on or turn o the UV lamp
REMINIDER OF REPLACING FILTER
When the machine detects the filter is saturated, the power indicator will keep flashing in red.
Please press the power button for 7 seconds to reset after installing a new filter.

REPLACING THE FILTER

Ensure the machine is unplugged before removing or installing the filter.
When the power indicator keeps flashing in red, the filter should be replaced.
Please wipe the dust on the filter regularly, do not wash or use it repeatedly.
Please use the filter specially designed for this product.
1. Unplug the power socket of the machine before replacing or installing the filter.
2. Invert the machine, and rotate the base along the direction marked "OPEN".
3. Take out the filter from the machine.
4. Remove the packaging of the filter.
5. Install the filter into the machine.
6. Then Install the base, rotate and tighten the base along the direction marked "CLOSE".
7. After replacing the filter, after powering on the air purifier, press and hold the power button for 7
18