Lionelo Zanna Manual De Usuario página 7

How to adjust the seat
1.
To raise or lower the chair seat, press height adjustment keys (A, fig. 5) and
set the desired height of the seat.
2.
If you release the keys, you can secure the seat at the desired height.
3.
The seat in the lowest position must not rest on leg locking elements (fig. 12). Set
the seat in the lowest position and then gently lift it. You will hear a distinctive
click indicating the seat has locked.
How to adjust the footrest
1.
There are two ways you can adjust the footrest – inclination angle adjustment
and footrest length adjustment.
2.
Lift the footrest to secure it in a higher position.
3.
To lower the footrest, press inclination angle adjustment keys (A, fig. 7) and
set the footrest in a desired position.
4.
To change the footrest length, press length adjustment keys (B, fig. 7) and
set the desired length.
How to adjust the backrest
To adjust the chair backrest angle, pull the lever at the back of the seat and set
the backrest in a desired position (fig. 8). There are four backrest positions you
can choose.
How to assemble and disassemble safety belts
1.
To assemble the belts, pull them through relevant holes in the fabric covering
and in the seat (fig. 9). You can choose two heights of belts.
2.
Place the plastic guard in relevant holes (fig. 10). Pull the belt and make sure
it has been properly locked in the seat.
3.
To fasten the belts, put them into the buckle. To undo the belts, press the
key in the center of the buckle.
4.
To disassemble belts, remove the protection (fig. 10) and pull the belts
through holes in the seat.
How to fold the chair
1.
Pull levers in the upper part of the frame (A, fig. 4). When you raise the chair,
frontal and rear legs will fold automatically.
‑ 7 ‑ EN