Vitesy Eteria Manual Del Usuario página 47

REGULATORY
For the European Union
The device is in conformity with the relevant
Union harmonization Legislation:
Directives 2014/30/EU, 2014/35/EU and
2014/53/EU
EMC Standards:
-> EN 55014-1:2017 + A11
-> EN 55014-2:2015
-> EN IEC 61000-3-2:2019
-> EN 61000-3-3:2013 + A1
Safety Standards:
-> EN 62233:2008
-> EN 60335-1:2012 + AC:2014 + A11:2014 +
A13:2017 + A1:2019 + A14:2019 + A2:2019
-> EN 60335-2-65:2003 +A1:2008 + A11:2012
-> IEC 60335-2-65:2002 + C1:2004 +
A1: 2008 + A2: 2015 (Second Edition) in
conjunction with IEC 60335- 1:2010 (Fifth
Edition) incl. C1:2010 + C2:2011 + A1:2013 + C1
2014 + A2 2016 + C1 2016
For the US and Canada
This equipment has been tested and found
to comply with:
-> Fans and Ventilators [CSA C22.2#113:2018
Ed.11]
-> Electric Fans [UL 507:2017 Ed.10 + R:27
May2020]
-> FCC [CFR 47 part 15 subpart B]
For more information visit:
https://vitesy.com/download
FCC Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, (2) This device
must accept any interference received,
including interference that may cause
undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help
device
This product contains FCC ID:
2AC7Z-ESP32MINI1
47