Overload Protection; Symbols On The Appliance; Product Overview (01); Scope Of Supply - AL-KO PS 1815 Manual De Instrucciones

GB
2.4.3

Overload protection

The appliance is equipped with an overload pro-
tection device that cuts out in the event of an
overload (e.g. if the saw blade becomes jammed).
After a short cooling-down phase, the appliance
can be switched on again.
2.5

Symbols on the appliance

Symbol Meaning
Pay special attention when handling
this product!
Read the operating instructions be-
fore starting operation!
Wear ear protection!
Wear eye protection!
Wear a face mask!
Do not use in the rain! Protect
against moisture!
Do not burn the tool!
2.6 Product overview (01)
No. Component
1 Rear handle
2 ON/OFF switch
3 Unlock knob for ON/OFF switch
4 Front handle
5 Unlock knob for retaining strap
20
No. Component
6 Retaining strap
7 Saw blade
8 Foot plate
9 Saw blade clamping ring
10 Work light
11 Operating instructions
12 Rechargeable battery*
13 Charger*
*Not included in the scope of supply, but can be
purchased under the following article numbers:
See Technical data.
2.7

Scope of supply

The items listed here are included in the standard
scope of supply. Check that all items are present:
No. Component
1 Cordless sabre saw
2 Retaining strap
3 Saw blade for wood
4 Saw blade for metal
5 Saw blade for plastic
6 "Cordless sabre saw" operating in-
structions
NOTE The rechargeable battery and charging
unit are not included in the scope of delivery and
must therefore be purchased separately.

3 SAFETY INSTRUCTIONS

3.1

General Power Tool Safety Warnings

WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
■
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
Safety instructions
PS 1815