Publicidad
Idiomas disponibles
Idiomas disponibles
Use of the Transmission
Diagram of the transmission
Speed pointer
When using the transmission system, the followings should also be considered:
When using the transmission system, try not to skip for shifting to avoid damages to the transmission. That is, it is required to shift
step by step, instead of by more than two levels at a time, so as to better protect the transmission system.
When the bicycle stops running, or goes downhill, don't run the transmission system in reverse, otherwise this will be bad for the
transmission system, and also may cause accidents.
The performance of the transmission will be affected when there is a fault in the transmission or the speed is shifted improperly.
In this case, it needs to be repaired and maintained in a professional bicycle shop to prevent major failures.
Mode
1-2
"-" Down
3-4
5-6
"+" Up
To speed up, please start in a lower level and then shift to a higher one as the
speed increases.
As you go uphill, the speed will drop, and you need to shift to a lower level to
pedal.
As you go with the wind, the speed will increase, and you need to shift to a
higher level to pedal.
The above are only for suggestions, and you may ride in proper speeds based on your personal habits.
Intensity
Light
Appropriate
Hard
Vehicle speed
Slow
Moderate
Fast
Publicidad
