Publicidad
Idiomas disponibles
Idiomas disponibles
8. Accessories
Only use original CAS battery packs and
fischer accessories.
Use only accessories that fulfil the require-
ments and specifications listed in these
operating instructions.
Only use fischer CAS battery chargers.
Battery packs with different capacities.
Buy battery packs only with voltage suitable
for your power tool.
Art.-No.: 563787 → FSS-B 18 V 2.0 Ah
Art.-No.: 552930 → FSS-B 18 V 4.0 Ah
You can find the complete range of accesso-
ries at www.fischer-international.com
or in the catalogue.
9. Repairs
Repairs to electrical tools must only be
carried out by qualified electricians!
With fischer electrical tools in need of repair
please contact your fischer dealer.
For addresses see:
www.fischer-international.com
10. Environmental Protection
Observe national regulations on environmen-
tally compatible disposal and on the recycling
of disused tools, packaging and accessories.
Battery packs may not be disposed of with
regular waste. Return faulty or used battery
packs to your fischer dealer!
Do not allow battery packs to come into con-
tact with water.
Only for EU countries: never dispose of
power tools in your household waste!
Used power tools must be collected separate-
ly and handed in for environmentally compat-
ible recycling in accordance with European
Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation
in national legal systems.
Discharge the battery pack in the power tool
before disposal. Prevent the contacts from
short-circuiting (e.g. by protecting them with
adhesive tape).
11. Technical Data
Explanatory notes on the specifications on
page 5.
Changes due to technological progress
reserved.
U = Voltage of battery pack
v = Feed rate
F = Extrusion force
m = Weight (with the smallest battery pack)
Measured values determined in conformity
with EN 60745.
Direct current
The technical specifications quoted are
subject to tolerances (in compliance with the
relevant valid standards).
Emission values
These values make it possible to assess
the emissions from the power tool and to
compare different power tools. The actual
load may be higher or lower depending on
the operating conditions, the condition of
the power tool or the accessories. Please
allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the
adjusted estimates.
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
ah
= Vibration emission value
Kh
= Uncertainty (vibration)
Typical A-weighted sound levels:
Lp
= Sound-pressure level
A
L
= Acoustic power level
WA
Kp
, K
= Uncertainty
A
WA
Wear ear protectors!
EN
13
Publicidad
