Tool it GYSPACK 400 Manual De Instrucciones página 6

Do not operate the device with a damaged
power supply cord or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject
it to heat or to longterm temperatures exceed-
ing 50°C.
Risk of explosion and fire!
A battery being charged can emit explosive
gas.
• During the charge, the battery must be
• Avoid flames and sparks. Do not smoke.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with
Connection:
• Class II device
• This machine is fuse-protected.
Maintenance:
• The power supply cable cannot be replaced.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available
6
Translation of the original instructions
100-240 V / 16 V CHARGER
placed in a well ventilated area.
battery acid, rinse the affected part of the
body with plenty of water and seek imme-
diate medical assistance.
If the cable is damaged,the device should
not be used.
on our website.
EN