Preparation For Operation - MSW Motor Technics MSW-DRRV10 Manual De Instrucciones

A. Adapter (bit) for drill chuck
B. Handle
C. Gripper
D. Riveting end piece
E. Operation ring wrench
3.2.

Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Keep the unit away from any hot surfaces. Always keep the unit out of
reach of children and persons with reduced mental, sensory or intellectual
functions.
ASSEMBLY OF THE UNIT
Before use, make sure that the correct riveting adaptor (D) is attached to the
machine. If not, replace it with the correct one using the supplied ring spanner (E).
Other rivet pins can be conveniently held in the holes in the handle of the wrench.
The wrench has appropriately sized eyelets for both rivet bit replacement (D) and
clamping (C).