Introduction; Device Description (Fig. 1); Lieferumfang; Proper Use - Scheppach HCE2600 Instrucciones De Utilización Y De Seguridad

2. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
According to the applicable product liability laws, the manu-
facturer of the device does not assume liability for damages
to the product or damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service techni-
cians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the
non-compliance of the electric regulations and VDE regula-
tions 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating instructions be-
fore installing and commissioning the device.
The operating instructions are intended to help the user to be-
come familiar with the machine and take advantage of its ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on
how to operate the machine safely, professionally and econom-
ically, how to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the operation of the machine in your country.
Keep the operating instructions package with the machine at
all times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before operat-
ing the machine and carefully follow its information.
The machine can only be operated by persons who were in-
structed concerning the operation of the machine and who are
informed about the associated dangers. The minimum age re-
quirement must be complied with.
In addition to the safety instructions contained in this operating
manual and the specific regulations of your country, the techni-
cal rules generally accepted for the operation of machines of
the same type must be observed.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the safety in-
formation.

3. Device Description (fig. 1)

1. Handle
2. High-pressure hose
3. Cable holder
4. On/off switch
5. Wheel cover
6. Connection for high-pressure hose
7. Transport wheel
8. Lance holder
9. Cleaner container
10. Water supply connection
11. Nozzle cleaning needle
12. Pistol
13. Extension
14. Turbo nozzle
15. Nozzle
16. Kärcher adapter
17. Cleaning brush
18. Rotating brush

4. Lieferumfang

• Operating manual
• Cleaning agent container
• Nozzle cleaning needle
• Pistol
• Extension piece
• Turbo nozzle
• Nozzle
• Cleaning brush
• Kärcher adapter
• Rotating brush

5. Proper Use

The high-pressure cleaner is designed to clean vehicles, ma-
chines, buildings, facades, etc. in the private sector.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be liable for
any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use
in commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade or
industrial businesses or for equivalent purposes.
6. Safety Instructions for High Pressure
Cleaners
Please read these safety instructions and the original operating
instructions prior to the initial use of your appliance. Proceed
accordingly.
• Apart from the notes contained herein the general safety
provisions and rules for the prevention of accidents of the
legislator must be observed.
• Warnings and notes that are attached on the appliance pro-
vide important notes for the safe operation.
GB/IE/NI 13