Miiego AXTIVE M1 Guia De Inicio Rapido página 3

ENG
Pairing your AXTIVE M1 Bluetooth speaker
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the button for 3 seconds until the indicator light flashes
WHITE (pairing mode).
3: Activate Bluetooth on your phone or other device and search for new
Bluetooth device and select: MIIEGO AXTIVE M1.
When AXTIVE M1 is connected the WHITE LED light is constantly on.
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 6 minutes.
Charging the AXTIVE M1 speaker
Use a 5V/1A USB adapter for charging.
During charging the red right is on. When fully charged the red light is off.
Full charging time is around 2.5 hours with 1A.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is
low and needs charging.
Turning Your AXTIVE M1 On and Off
ON: Press the Button for 3 seconds until a tone is heard.
OFF: Press the Button until a tone is heard.
Activate Siri on iOS-device: Double press the PLAY button (works only in
Bluetooth mode).
Play music from AUX mode
Insert AUX audio cable on the bottom of the speaker.
(in AUX mode switching songs on +/- buttons is unavailable)
Pairing and connecting 2 x AXTIVE M1 speakers with TWS
TWS only works when connecting two AXTIVE M1s by MIIEGO® together.
There needs to be free distance between them.
1: Turn on both speakers (Bluetooth mode). Make sure they are unconnected.
2: Press and hold the PLAY button on one speaker for 2 seconds. The product
emits a tone to indicate entering TWS-pairing mode.
3: The product then emits three tones and the LED indicator light (10) will be
constantly on. This is then the slave speaker. LED indicator light on master
speaker will flash to indicate successful TWS-pairing.
4: Activate Bluetooth on your phone/device and connect with the master
speaker.
2