Cleaning And Care - auna Dazzl 5.0 Manual De Instrucciones

LINE IN
Connect external media players (mobile phone, CD player, laptop) using the
supplied 3.5 mm audio cable to the LINE input of the Dazzl and switch it on.
When the audio cable is plugged in, the Dazzl automatically switches to
LINE mode. Therefore, remove the cable if you want to play music via BT.
The green LINE LED indicates that an audio cable is connected.
Charge internal battery
Connect the Dazzl to a free USB port of a (switched on) computer or a
compatible 5 V USB power adapter (available in specialised shops). The
charging time is about 6-7 hours if the device is not used at the same time.
The red charging LED lights up as long as the battery is being charged and
switches off as soon as the battery is fully charged.

CLEANING AND CARE

• Use a soft cloth to clean the surface of the speaker. Do not use scouring
pads, scouring agents or harsh cleaning agents for cleaning.
• If the speaker does not work properly during a thunderstorm, unplug it
from the mains socket and plug it back in after one minute.
• Do not allow small objects or liquids to enter the speaker.
• If you find small objects or liquid inside the speaker and smoke or odour
comes out, disconnect the speaker from the mains immediately and
contact a specialist company for inspection and repair.
EN
15