2.4.
Safe use of the unit
a)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Disconnect the unit from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
c)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
d)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
e)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
g)
Clean the unit regularly to prevent permanent dirt build-up.
h)
Do not tamper with the unit to alter its performance or design.
i)
Keep the unit away from sources of fire and heat.
CAUTION! Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features provided to the
user, there is still a slight risk of accident or injury when handling the unit. You
are advised to use caution and common sense when using this product.
3. Rules of use
The product is used for rapid, digital examination of bacterial colonies.
The user is responsible for any damage resulting from misuse.