supervision or training regarding the use of the appliance in a safe manner and understand the dangers
involved. Children must not play with the appliance. Cleaning and maintenance to be carried out by the
user should not be carried out by children without supervision.
MOUNTING
1. Assemble the Deck Frame and Support Base together in the sequence below. Remove the mounting
screw from the bottom of the housing frame.
2. Insert the power cord through the slot in the center of the base, and then mount the chassis frame on
the support base.
3. Secure the chassis frame on the support base with the two mounting screws removed earlier. Insert the
power cord through the appropriate slots, and then fix it with the clamp.
OPERATION
Plug in the appliance. Check if the output has a current capacity of at least 10 amps.
Models that include the selector knob: Select the speed with the appropriate selector knob. Press the
rocker switch to oscillate the heater. Press it again to turn off the rocking motion of the appliance. The
oscillation of the heater can be moved manually by pressing the lever located at the rear of the appliance.
SAFETY DEVICE
This appliance is provided with a safety device that disconnects the appliance when the heater is tilted
thanks to a switch located at the bottom of it.
MAINTENANCE
1. The appliance only needs regular external cleaning.
2. After use and before cleaning, always unplug the appliance and wait for it to cool down.
3. Dust the grills.
4. Do not clean the painted parts with chemicals or solvents, use only a damp cloth.
TECHNICAL DATA
220~240V~, 50Hz - 1200W
WARNING: This heater is not equipped with a room temperature control device. Do not use this heating
appliance in small rooms that are occupied by people who cannot leave it on their own, unless permanent
supervision is provided.
This sign indicates that this product must not be disposed of together with other household waste
throughout the EU.
To avoid possible damage to the environment or health caused by inappropriate or / and uncontrolled
waste production, recycle correctly to promote the sustainable reuse of material resources. To return your
used device, use the return and collection systems or contact the store where the product was purchased.
They can collect this product for recycling appropriate to environmental compliance.
8