Publicidad
Idiomas disponibles
Idiomas disponibles
SDM630 V2100A SERIES
Three Phase Multifunction Din Rail Energy Meter
:
•::. -:: . . º
..
V
l
DIN RAIL SMART METER
FOR SINGLE AND THREE PHASE
ELECTRICAL SYSTEMS
User Manual v1.o
1./ntroduction
This document provides operating, maintenance and
installation instructions.These units measure and display
the characteristics of single phase two wires (1p2w),three
phase three wires (3p3w) and three phase four wires (3p4w)
networks.The measuring parameters include voltage (V),
frequency (Hz),current (A),power (kW/kVa/kVar),import,
export and total Energy (kWh/kVarh).The units can also
measure Maximum demand curren! and power, this is
measured over preset periods of up to 60 minutes.
These units are max 1 OOA direction operated and do not need
to connect with extemal curren! transformers (CT).Built-in pulse,
RS485 Modbus RTU/Mbus outputs.Configuration is password
protected.
1. 1 Unit Characteristics
The SDM630 1 OOA V2 series meters have five models:
SDM630-Pulse V2,SDM630-Standard V2,SDM630-Modbus V2,
SDM630-Mbus V2,SDM630-MT V2.
Model
Measurement
Output
Tariff
kWh/ k Varh,kW/ k Var,kVA,
pulse
no
SDM63J-PulseVl.
P,F,PF,dmd, V,A, TH D,etc.
pulse/ M odbus
no
kWh/ k Varh
SDM6»Slm, V2
kWh/ k Varh,kW/ k . V ar,kVA, pulse/ M odbus
no
S"""""""'V2
P,F,PF,dmd, V,A, TH D,etc.
kWh/ k Varh,kW/ k Var,kVA, pulse/ M bus
no
SDM<OOMuaV2
P,F,PF,dmd, V,A, TH D,etc.
kWh/ k Varh,kW/ k Var,kVA,
4tariffs
pulse/ M odbus
SDMIIDMTV2
P,F,PF,dmd,V,A,THD,etc.
10 segments
Two pulse output indicate real-time energy measurement. An
RS485/Mbus output allows remole monitoring from another
display or a computer.
1.2 RS485 Serial-Modbus RTU
and
'Not for SDM630-Pulse V2
SDM630Mbus V2
RS485 serial port with Modbus RTU protocol to provide a
means of remotely monitoring and controlling the Unit.Set-up
screens are provided for setting up the RS485 port.
1.3Mbus
'For SDM630-Mbus V2 only
This uses an MBus port with EN13757-3 protocol to provide
a means of remotely monitoring and controlling the Unit.
screens are provided far setting up the RS485 port.
M
Set-up screens are provided far setting up the
Bus port.
1.4 Pulse output
Two pulse outputs that pulse measured active and reactive
energy.The constan! of pulse output 2 for active energy is
400imp/kWh (unconfigurable),its width is fixed at 100ms.
The default constan! of configurable pulse output 1 is
400imp/kWh,default pulse width is 1 OOms.The configurable
pulse output 1 can be set from the set-up menu.
2.Start Up Screens
Ul.n2 MD t.� �.11111
-2
B B B B
L
MkWh
T
1
- • • •
The first screen lights up
Vl % THD
2-3
B•B B
-8
MkVArh
all display segments and
� :i!
can be used as a display
L �'
-B.B:B.B
•
•
•
�z
A
check.
kV
oc
G
PFC1C2
SoFI:
1.3D 2
Software version information
e
D ll{
l
51:
n
The interface performs a
1:f51:
self-test and indicates the
PRSS
result if the test passes.
*After a short delay, the screen will display active energy interface
as follows:
DDDD
kWh
D 3 l.Y
:i!
Total active energy in kWh.
3.Measurements
The buttons operate as follows:
Selects the Voltage and Curren! display
screens. In Set-up Mode, lhis is the "Left"
or "Back" button_
Select the Frequency and Power factor
display screens. In Set-up Mode, this is
the "Up" button.
Select the Power display screens. In Set
up Mode, this is the "Down" bullan.
Select the Energy display screens. In Set
up mode, this is the "Enter'' or "Right"
button_
3.1 Voltage and Current
f?!il
'Not for SDM630-Standard V2.
Each suocessive press of the
button selects a new parameter:
nnnn
L'
UUU. U V
L'
nnnn
Phase to neutral voltages.
uu u. u
L'
nnnn
uuu. u
L'
nnnn
u. u u u
L'
A
nnnn
Curren! on each phase_
u. u uu
L'
nnnn
u. u uu
L'
nnnn
U U. U U V%THD
Phase to neutral voltage
L'
nnnn
uu. u u
THD% of 2nd to 19th.
L'
nnnn
uu. u u
nnnn
L'
uu. u u
1 % THD
Each phase Curren!
L'
nnnn
u u. u u
THD% of 2nd to 19th.
L'
nnnn
uu. u u
3.2 Frequency and Power Factor and Demand
1B
'Not for SDM630-Standard V2
Each successive press of the
button selects a new range:
Frequency and Power
:i!
nnnn
uu. u u
Hz
Factor (total).
D.999
PF
D.999
L'
Power Factor of each
D.999
L'
phase.
D.999
L'
PF
MD
kW
nnnn
u. u uu
:i!
Maximum Power Demand.
MD
L'
nnnn
u. u uu
Maximum Curren!
L'
nnnn
A
u. u uu
Demand.
L'
nnnn
u. u uu
3.3Power
'Not for SDM630-Standard V2
lli
Each successive press of the
bullan select a new range:
kW
L'
nnnn
u. u uu
lnstantaneous Active
L'
nnnn
u. u uu
Power in kW.
L'
nnnn
u. u u u
L'
nnnn
u. u uu
lnstantaneous Reactive
Ar
L'
nnnn
u. u uu
kV
Power in kVar.
L'
nnnn
u. u uu
L'
nnnn
u. u uu
lnstantaneous Volt-Amps
L'
nnnn
u. u uu
in KVA.
A
L'
nnnn
u. u uu
kV
kW
nnnn
u. u u u
kVAr
:i!
nnnn
Total kW, kVarh, kVA.
u. u uu
kVA
nnnn
u. u uu
3.4 Energy Measurements
lll!il
Each successive press of the
button selects a new range:
�
kWh
nnnn
uuuu
D3.IY
lmport active energy
in kWh.
�
kWh
nnnn
uuuu
Export active energy
nnnn
u u. u u
in kWh.
'
Tariff 1 active energy
kWh
T
1
Tariff 2 active energy
nnnn
Tariff 3 active energy
uuuu
Tariff 4 active energy
nnnn
uu. u u
*For SDM630-MT V2 only
kWh
nnnn
uuuu
03.IY
:i!
Total active energy in kWh_
�
nnnn
uuuu
-
kVArh
lmport reactive energy
nnnn
u u. u u
nnnn
uuuu
kVArh
nnnn
Export reactive energy
u u. u u
Tariff 1 reactive energy
T
1
Tariff 2 reactive energy
kVArh
Tariff 3 reactive energy
nnnn
uuuu
Tariff 4 reactive energy
nnnn
uu. u u
*For SDM630-MT V2 only
nnnn
uuuu
kVArh
:i!
nnnn
Total reactive energy
uu. u u
dRl:E
date
Year/month/day.
2
nnn
uuu
1sl,Jan,2000 (default)
,
,
*For SDM630-MT V2 only
n
n
u ,. u '
:nnE
T
Time
.
Hour/minute/second
2
nn
n
u u. u
'
. '6
Example:00:02: 16
*For SDM630-MT V2 only
.
*The parameters of date and time can only be setted via RS485
communication.
4.Set Up
lll!il
To enter set-up mode, press the
button for 3 seconds,
until the password screen appears.
PRSS
Setting up is password
protected so you must
enter the corree! password
(default '1000') before
nnnn
uuuu
processing.
PR5S
lf an incorrect password
is entered, the display will
show:
E,,
PASS Err
f?!il
To exit setting-up mode, press
repeatedly until the
measurement screen is restored.
4.1 Set-up Entry Methods
Sorne menu items, such as password, require a four-digits
number entry while others, such as supply system,
require selection from a number of menu options.
4.1.1 Menu Option Selection
1B
lli
1. Use the
and
buttons to scroll through the
difieren! oplions of the set up menu.
lll!il
2. Press
to confirm your selection
E
3. 11 an item flashes, then it can be adjusted by the
lli
buttons_
4. Having selected an option from the curren! layer, press
to confirm your selection. The SET indicator
will
appear.
f?!il
5. Having completad a parameter setting, press
to return
l!lll
to a higher menu level. The SET indicator
will
be removed
lli
and you will be able to use the
and
buttons far
further menu seleclion.
f?!il
6. On completion of all setting-up, press
repeatedly until
the measurement screen is restored_
4.1.2 Number Entry Procedure
When setting up the unit, sorne screens require the entering
of a number_ In particular, on entry to the setting up section, a
password must be enterad_ Digits are set individually, from left
to right. The procedure is as follows:
1. The curren! digit to be set flashes and is set using the
lli
and
buttons
lll!il
2. Press
to confirm each digil selting. The SET indicalor
appears after the last digit has been set.
f?!il
3. After setting the last digit, press
to exit the number
setting routine. The SET indicator will be removed.
4.2 Change Password
SE 1:
l!lll
lli
PRSS
Use the
and
to choose the changa
,
password option.
nnn
IUUU
lll!il
5 E 1:
Press the
to enter the
PRSS
change password routine.
The new password screen
,
will appear with the first
nnn
IUUU
digit flashing.
1B
5 E 1:
lli
Use
and
to set
PRSS
the first digit and press
llli
to confirm your
,
selection. The next digit
nnn
IUUU
will flash.
SE 1:
PR5S
Repeat the procedure far
the remaining three digits.
, ,
nn
1
IUU
SE 1:
PRSS
After setting the last digit,
SET will show.
,
nn
1
1
IUU
f?!il
to exit the number setting routine and return to the
Press
Set-up menu. SET will be removed
4.3 DIT Demand lntegration Time
'Not for SDM630-Standard V2
This sets the period in minutes over which the curren!
and power readings are integrated for maximum demand
measurement. The options are: O, 5, 8, 10, 15,20,30,60 minutes_
E
From the set-up menu, use
SE
l:
to select the DIT option.
d 11:
The screen will show
,n
the currently selected
IU
integralion lime.
SE 1:
Press
d 11:
selection routine. The
curren! time interval will
,n
flash .
IU
SE
l:
Use
d 11:
buttons to select the time
required.
SE
l:
Press
d 11:
selection. SET indicator
cD
will appear.
f?!il
Press
to exit the DIT selection routine and return to the menu.
4.4 Supply System
The unit has a default setting of 3Phase 4wire (3P4).
Use this section to set the type of electrical system.
1H
From the set-up menu, use
5':15
3P3
select the system option.
The screen will show the
currently selecled power
supply.
5':IS
3P3
Press
selection routine_ The
curren! selection will flash.
5':15
UselHand
IP2
buttons to select the
required system option:
1 P2 (W),3P3 (W),3P4 (W).
S':15
3PY
Press
selection. SET indicalor
will appear.
f?!il
Press
to exit the system selection routine and return to
the menu. SET will disappear and you will be returned to the
main set-up Menu.
and
4.5 Backlit set-up
lll!il
Backlit lasting time is settable,default lasting time is 60minutes
SE 1:
lf it's setted as 5, the backlit
will be off in 5 minutes if
LP
there is no more further
60
operation.
5 E 1:
Press
selection routine. The curren!
LP
time interval will flash
The options are:
6[]
O(always on)/5/10/30/60/120
1H
lli
Press
and
to select the lime interval.Then press
lll!il
E
to confirm the set-up.
4.6 Pulse Output
This option allows you to configure the pulse output 1.The
output can be set to provide a pulse far a defined amount of
energy active or reactive. Use this section to set up the
pulse output for:
Toal kWh/Total kVarih
Impar! kWh/Export kWh
lmport KVarih/Export KVarh
SE 1:
kWh
l!lll
From the set-up menu, use
,l':I
to select the Pulse output
option.
SE 1:
kWh
Press
,l':I
selection routine. The unit
symbol will flash.
5 f 1:
UseE!lland
,l':I
kVArh
buttons to choose kWh ar
kVarh.
On completion of the entry procedure, press
f?!il
the setting and press
to return to the main set up menu.
Warnings
Importan! Safety lnformation is contained in the
Maintenance section. Familiarize yourself with this
information befare attempting installation ar other
procedures. Symbols used in this document:
A
Risk of Danger: These instructions contain
importan! safety information. Read them befare
starting installation or servicing of the equipment
A
Caution: Risk of Electric Shock
lli
and
buttons
lll!il
to enter the
1H
lli
and
lll!il
to confirm the
lli
and
butlons to
lll!il
to enter the
lli
lll!il
to confirm the
lll!il
to enter the
lli
and
buttons
lll!il
to enter the
lli
lll!il
to confirm
Publicidad
