Publicidad
Idiomas disponibles
Idiomas disponibles
Your appliance must never be switched on through an external
❑
timer or any kind of separate remote control system.
Please note: Should the symbol
❑
surface, you need to be careful when handling the product.
This symbol means: CAUTION, this surface may get very hot
during use.
The symbol
temperature, however the other metallic or non-metallic
surfaces can also become very hot during use and it is
therefore advisable to always handle them with care and if
possible with the help of isothermal gloves or other thermal
protection. In case of doubt concerning the temperature of a
certain surface it is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all
danger.
In case of need you should return the appliance to this electrician.
BEFORE USE
Unpack the appliance and accessories, then wash and wipe the accessories.
PREHEATING
When the appliance has been plugged in, set the thermostat on the desired
temperature and set the timer (between 0 and 10 minutes). To reach a stable and
correct temperature for use, it is necessary to wait 5 minutes. During this time, the
temperature control light will go on and off several times. A good preheating will allow
you to have browned and crispy fries.
HOT AIR FRYING
1.
Connect the mains plug into an earthed wall socket.
2.
Place the cooking grid at the bottom of the basket
3.
Carefully pull the basket out of the air fryer
is always put on the surface with the highest
7
be indicated on a certain
TKG FTL 1010
Publicidad
