Bluetooth ® Pairing - Hama 00184154 Instrucciones De Uso

7. Bluetooth pairing
®
Note - pairing
• Ensure that the Bluetooth®-enabled device is switched on and that the Bluetooth® function
is activated.
• Please refer to the operating instructions of your device for more information.
• When the product is switched on for the first time, pairing begins automatically.
• The product and the device should not be more than 1 metre apart. The shorter the distance, the
better.
• Switch the product on using the MFB button (2).
• This product has an integrated Bluetooth
• smartphone) to the product. The product also has a further function that enables transmission to
Bluetooth devices (such as Bluetooth
®
7.1 RX receive mode
You can pair your devices with the product using Bluetooth
control playback directly on the terminal device. When used as a receiver, up to 8 transmitters can be
stored, the audio signal from which can each be received by a Bluetooth
1
Connection to the device
To connect to your device, connect it using the 3.5 mm AUX cable and the audio input (4) on
the product.
2x
• If the LED (3) is flashing alternately red and blue:
the product is searching for a Bluetooth
• If the LED (3) lights up blue:
the product is already paired with a Bluetooth
Search using your device for the product (only required on the first connection)
2
Open the Bluetooth
devices shows Hama BT-Senrex.
Select Hama BT-Senrex and wait until product is listed as connected in your device's
Bluetooth settings.
®
Note - Bluetooth
Some devices require a password in order to connect to another Bluetooth
• Enter the password 0000 to connect the headphones if your device prompts you to
enter one.
®
headphones/speakers).
®
Select RX mode by pushing the switch (1) to the right.
Press the MFB button (2) twice.
settings on your device and wait until the list of found Bluetooth
®
password
®
function that allows streaming (e.g. from a
and use it as a playback device. You can
®
connection.
®
device.
®
device.
®
device.
®
®
5