Publicidad
Idiomas disponibles
Idiomas disponibles
Double Piston Lever Type Grease Gun
TECHNICAL DATA
Maximum pressure: 413 bar (6000 psi)
Grease amount: 500 cm³
Delivery rate: 2.4 g per stroke
Filling options: Bulk grease
Connection thread: M10 x 1
Pressure pipe length: 150 mm
Cylinder wall thickness: 1.2 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This grease gun with 4-claw grease nipple coupling for a firm hold on the grease nipple and double
piston with double inlet in the grease gun head for 3x higher grease output per stroke is used to
lubricate vehicle and machine components with grease nipples.
SAFETY INFORMATIONS
• Keep children and unauthorized persons out of the work area.
• Do not let children play with the product or its packaging.
• Make sure the work area is adequately lit.
• Keep the work area clean, tidy, dry and free of other materials.
• Do not make any changes to the product.
• Only use the product for grease, other substances can lead to property damage and personal
injury.
• Always make sure you have a firm footing so that you can keep your balance at all times.
• Store this product in a dry and safe place, out of the reach of children.
OCCUPATIONAL SAFETY
Always wear the following protective equipment,
if you work with this product:
Non-slip safety shoes
Working gloves
Safety goggle
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 71040
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
