Descargar Imprimir esta página

Krups XP3410 Manual Del Usuario página 29

Ocultar thumbs Ver también para XP3410:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
PROBLEMS
The espresso leaks over
the edges of the filter.
Your espresso tastes bad.
The
appliance
work
If it is not possible to identify the cause of a malfunction, please contact an approved
service centre. Never disassemble the appliance. (if the appliance has been
disassembled, the guarantee may no longer be valid).
ELECTRIC OR ELECTRONIC PRODUCT
We participate in the protection of the environment!
Your appliance contains a number of materials that can be reused or recycled.
Take it to a collection point or an approved service centre so that it can be dealt
with appropriately.
POSSIBLE CAUSES
The filter holder is not
positioned correctly.
The rim of the filter holder
is encrusted with coffee
grounds.
The
soft
positioned incorrectly.
The appliance was not
rinsed
correctly
descaling.
doesn't
The
pump
deactivated due to a lack
of water.
The removable water tank
has been fitted incorrectly.
AT END OF LIFE
Put the filter holder in
place and lock it (turning it
from left to right as far as it
will go).
Remove excessive coffee
grounds that prevent the
filter holder to be locked.
Remove excessive coffee
grounds and clean the
grid through which water
passes
sponge.
capsule
is
Check
capsule has been inserted
correctly: the paper must
not protrude outside the
filter.
Rinse
after
according
instructions and check the
quality of the coffee.
has
been
Fill the tank with water
and re-initiate the pump
(see paragraph: USING
FOR THE FIRST TIME).
Avoid emptying the tank
completely.
Position the water tank
correctly.
SOLUTIONS
with
a
damp
that
the
soft
the
appliance
to
the
27

Publicidad

loading