Jocel JEXC-014566 Manual De Instrucciones página 53

If the lights of your product do not light, put the 0-1 switch under the canopy to position
1. (Pictures 12-13)
SETTING INTERNAL TEMPERATURE
Temperature setting of your product has made at the factory in a manner that it is
operated under the most appropriate conditions.
Be careful for always placing frozen product inside your product.
Preservation temperature of the products can be observed from the display and
adjusted by means of an electronic thermostat.
When you run your product at factory set value, you get the best result in terms of both
the performance and energy consumption.
Run your device empty for at least three hours. Therefore, inside of your product will
be cooled down in the best way. It is recommended to place the thermostat in position
4
WARNING!
Internal temperature of your product can be adjusted between -18°C and -23°C.
Always provide a gap between the top and the product you load for ensuring air
circulation.
CAUTION!
PLACE THE FOOD
Before loading your storage cabinet with foodstuff, run your product empty for three
hours.
Do not place products inside, which are dangerous to be cooled down.
Leave a gap of at least 2 cm between the top and the product you load for ensuring air
circulation.
52