Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
4. Hold the battery door/switch at an angle and place the
small tab on the bottom of the battery door/switch into
the slot in the VANTAGE body.
5. Firmly push and hold the battery door/switch closed
against the VANTAGE body. Note: It may be necessary
to rest the battery door/switch against a fixed object for
leverage.
6. Swing the battery door latch over the door and snap it
into place. (Hint: Apply pressure to the middle of the
latch, not to the free end.)
Mounting
1. Select the desired
position above or
below the helmet
brim.
2. Loosen the locking
screw.
3. Slide the clamp
assembly over the
brim of the helmet and rotate it to the desired position.
4. The wedge can be used to direct the beam upward or
downward. Place it on the portion of the helmet clamp
that is located opposite the locking screw.
5. Tighten the locking screw until the VANTAGE is securely
attached to the helmet.
Switch Operation
The
VANTAGE
a switch knob that turns in
either direction to activate the
main and the tail LEDs.
Maintenance
Use a soft cloth and mild detergent to clean the LED
lenses and keep them free of dirt and grime.
Note: Always avoid aggressive cleaning solutions as they
may damage the VANTAGE.
Locking
Screw
Off
features
On
Helmet
Clamp
Wedge
On
Publicidad
