All manuals and user guides at all-guides.com
EN
DUALPHONE CAR KIT
PRODUCT DESCRIPTION
DUALPHONECARKIT is a Bluetooth
speakerphone kit that supports
®
mobile phones with headset or handsfree profiles. The product features
include the Dual Phone function, which allows you to use one speaker-
phone with two mobile phones at the same time, and the DSP filter to
cut out the echo effect and background noise, guaranteeing clear con-
versation with no interference.
Warning: always drive carefully and respect the law.
Check legal limitations on the use of mobile phones while driving in your
country. Users of this product must respect the legislation in force in
their country of use.
RECHARGING THE SPEAKERPHONE
The Bluetooth
speakerphone must be charged before use.
®
Connect the battery charger to the cigarette lighter socket and the char-
ge plug to the speakerphone charging socket.
While charging, the LED light will remain red to show that charging is
taking place.
When the speakerphone has recharged the LED will turn off.
Unplug the charge plug from the speakerphone before use.
NOTE: if the speakerphone battery is completely dead or if the speaker-
phone has not been used for a long time, the LED light could take a few
minutes to turn on.
When the speakerphone battery is almost flat, the LED light will flash
red to show that the battery level is low.
NOTE: the speakerphone will take approx. 3 hours to charge comple-
tely.
TO TURN ON/OFF
TO TURN ON: press and hold the MFB button for approx. 5 seconds. The
speakerphone will emit a tone and the LED will begin to flash approx.
every 5 seconds.
TO TURN OFF: press and hold the MFB button, the speakerphone will
emit a short tone and the LED will flash. The speakerphone will then
emit a new, longer tone and the device will turn off.
9