Product Characteristics; Technical Data - YATO YT-84860 Manual De Instrucciones

PRODUCT CHARACTERISTICS

The engine-powered rototiller is designed for opening and cultivating small patches of soil. It makes cultivating land in gardens and
plots signifi cantly easier. Soil cultivation is carried out using rotating blades. It is unacceptable to use the rototiller for cultivating
larger patches of land. Proper, reliable and safe operation of the tool depends on appropriate use, that is why you should
Read this entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the tool, failure to observe the safety
regulations and recommendations of this manual. Use of the tool for purposes other than those for which it was intended shall
cause the loss of the user's rights to a warranty and statutory warranty.
EQUIPMENT
The rototiller is supplied complete but requires assembly before fi rst use.

TECHNICAL DATA

Catalogue No.
Fuel tank capacity
Oil tank capacity
Groove width
Max. groove depth
Blade diameter
Chain guide bar type
Max. chain speed
Number chain drive wheel teeth and scale
number of cylinders
number of strokes
Spark plug type
Engine displacement
Engine power
Maximum engine rotary speed
Fuel consumption
sound pressure
Vibration level - right/left handle
SAFETY INSTRUCTIONS
Manual
Read the instructions carefully. Familiarise yourself with the controls and proper use of the tool. If you are going to pass the tool
on to another person, always attach the manual to the tool. Always use the tool in accordance with the guidelines in the manual.
Never allow children or persons who have not read the manual to operate the tool. National regulations may specify the exact
age of the operator.
Never work when anyone else, especially children or pets, is around. Before starting work, designate a safety zone within which
bystanders and pets will not be allowed.
Remember that it is the operator or the user who is responsible for accidents or hazards to other people or the environment.
Preparation
Always wear sturdy shoes and long trousers when working. Do not operate the tool barefoot or when wearing open toe sandals.
O R I G I N A L
14
Parameter
Weight
Chain type
Engine
cooling
Noise
power L
WA
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
GB
Unit
[kg]
[l]
[l]
[mm]
[mm]
[mm]
[m/s]
[cm ]
3
[kW]
[min ]
-1
[l/h]
[dB (A)]
[dB (A)]
[m/s ]
2
IMPORTANT!
I N S T R U C T I O N S
Value
YT-84860
36
1.5
0.6
600
170
270
20BPX078X (0.325" Oregon)
200PXBW095 / 200PXBK095, Oregon
19.2
7 teeth x 8.255 mm
TB1P70FA
1
4
Air cooling
F7RTC
173
3.6
3000
1.6
77.9 ± 0.199
92.58 ± 0.199
3.10 ± 1.5 / 3.02 ± 1.5