AL-KO Powerline 5204 VS selection Manual página 27

Electrostart without primer/choke (
1.
( 13/1).
2. Pull in the safety brake handle on the handlebar and
hold it ( 16
3. Turn the ignition key fully to the right in the ignition
lock ( 18).
4. As soon as the motor starts running, release the
5. According to the desired motor speed, set the
max.
Blade coupling (optional)
With the blade coupling, the mower blade can be
engaged or disengaged while the motor is running.
Engaging the blade coupling
1. Pull in the safety brake handle on the handlebar
and hold it ( 16) - The brake handle does not
lock.
2.
- The blade coupling is engaged.
Disengaging the blade coupling.
3. Release the safety brake handle (
- The blade coupling is disengaged.
Turn the motor off
Lawnmower without blade coupling
1.
2. Release the safety brake handle (
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
474 _
13)
START
min and
( 14/1)
22).
14/2).
min ( 12/2).
22).
Lawnmower with blade coupling
1. Release the safety brake handle (
2.
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Wheel drive (optional)
Caution!
Engage the transmission only when the motor is
running.
Switching on the wheel drive
1. Press the transmission control handle against the
handlebar and hold it (
control handle does not lock.
Switching off the wheel drive
1. Release the transmission control handle (
Vario transmission (Speed Control) (optional)
ground speed of the lawnmower.
Caution!
towards ( 20/2)
( 20/1)
ground and lawn conditions.
GB
25).
min ( 12/2).
( 20)
19
21).
20)
20) towards
27