Audizio TOULON Manual De Instrucciones página 9

Press the POWER/STANDBY button to turn ON the unit, follow the instructions below to connect with BT.
Pairing a BT streaming capable smartphone (or other BT capable device) to the Audizio Toulon:
1. Press the POWER/STANDBY button on the main unit or the remote control to turn on the unit.
2. Press the SOURCE button on the main unit or remote control to select BT mode, "bt" blinks on the display.
3. Turn on the BT streaming function of your BT capable device and enable the search or scan function to find the Audizio
Toulon.
Select "Audizio Toulon" from the device list when it appears on your devices' screen. If required, enter the pass code
"0000" to pair.
4. After successfully pairing device and Toulon, the display will show "bt" continuously (the blinking has stopped). You can
begin playing music from your device wirelessly.
5. After selecting your favorite song, press the PLAY/PAUSE button on the main unit or on the remote control to play or
pause the song.
6. Turn the volume control on the main unit or press the volume buttons on the remote control to adjust to the desired
volume level.
7. Press the or button on the main unit or on the remote control to skip to previous or next song.
8. If you want to pair the Audizio Toulon with another BT enabled device, press and hold the PAIR Button for 3 seconds or
turn off the BT function of device currently paired with Audizio Toulon then repeat the steps above.
NOTE: The following is only functional by using the remote control.
This unit provides 4 different EQ modes to enhance your listening experience. You can select the desired effect by pressing
the EQ Button on remote control at following sequence:
ROCKPOPJAZZCLASSICOFF
  
NOTE: The following is only functional by using the remote control.
Press the MUTE button on the remote control to mute the sound output from the speaker. "V 00" will appear on the display.
Press the MUTE button again to resume to speaker playback.
NOTE: The following is only functional by using the remote control.
The sleep timer allows you to turn the unit off automatically after a preset time is reached.
1. To activate the sleep timer, turn the unit on and press the SOURCE button to select FM radio, CD, USB, BT or AUX IN.
2. Press the SLEEP button on the remote control, "SLEEP" appears on the display.
3. Repeatedly press the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70, 80 or 90
minutes. Wait for 3 seconds after your selection for the unit to confirm the selection, the unit will play for the selected
length of time then automatically shut down.
4. To cancel the sleep timer, press the SLEEP button repeatedly until the timer on the display shows "OFF", the sleep time
icon "SLEEP" disappears from the display. To turn the unit off before the selected length of time, press the
POWER/STANDBY button at any time.
NOTE: To check the remaining sleep time, press the SLEEP button once. If you are falling asleep to music from an external
device connected to the AUX input, the sleep timer will shut off the power to this system but it will not turn off the external
device.
NOTE: AUX cable is not supplied.
You can use the auxiliary input jack to connect an external playback device (for example a CD player or MP3 player).
Press the SOURCE button until you see "AUX" appearing on the display.
Plug the end of a 3.5 mm jack – 3.5 mm jack cable into the AUX IN socket on the front panel. Connect the other end of the
cable to your external device. Switch on your external device and choose your favorite soundfile.
 
9