Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Volume down
6.
Volume up
7.
Sounds of nature
8.
Motion sensor
Control panel (fig. 3)
1.
On/Off switch
2.
Digital display
3.
Swinging time adjustment (15/30/60 minutes)
4.
Melodies
5.
5 swinging speeds
How to assemble
1.
Unfold the right and left frame module until you can hear a distinctive click
(fig. 4).
2.
Position the right and left modules so that they are turned towards each other
with their internal sides, and then connect them with the use of crosswise
rods (fig. 5).
3.
To connect the frame to the carrycot base, insert upper rods into relevant
holes (fig. 6). Correct assembly is signaled by the distinctive click.
4.
Unfold the carrycot, undo the internal cover zip and insert metal rods into
carrycot supports (fig. 7). Next zip the internal cover up and spread the
carrycot sunshade.
5.
Connect the carrycot to carrycot base placed on the frame (fig. 8) by
inserting carrycot handles into base holes. Correct assembly is signaled by
the distinctive click (fig. 9).
Sunshade
To spread the sunshade, press keys (1), fig. 10, and then set the sunshade in
a desired position.
Sling
The carrycot may also serve as a sling. To remove the carrycot from the frame,
press keys (2), fig. 11, and then pull up (fig. 12).
EN
‑ 12 ‑
Publicidad
