Publicidad
Idiomas disponibles
Idiomas disponibles
GB
combustible (e.g. motor fuels)
or explosive liquids, salt water,
cleaning agents and foodstuffs
is not permitted. The tempera-
ture of the liquid being trans-
ported must not exceed 35 °C.
Non-observance can lead to
device damage and create a
risk for the user.
•
Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
•
Monitor the equipment dur-
ing operation (particularly in
residential spaces, in order to
detect automatic switching off
or dry running of the pumps
in time. Regularly check the
function of the float switch (see
chapter "initial operation").
Non-observance will invali-
date all guarantee and liability
claims.
•
Please note that the pump is
not suitable for continuous op-
eration (e.g. for watercourses
in garden ponds). Check the
equipment regularly for correct
functioning.
•
Note that the lubricants used
in the equipment may cause
damage or contamination if
they escape. Do not use the
pump in garden ponds with fish
stocks or valuable plants.
•
Do not carry or fix the equip-
ment by the cable or pressure
line.
48
•
Protect the equipment from
frost and from running dry.
•
Use only original accessories
and do not carry out conver-
sion work on the equipment.
•
Please read the notes in the
operating instructions on the
topic of "maintenance and
cleaning". Any measures above
and beyond these, particularly
opening the equipment, are to
be carried out by an electrician.
In the case of repairs, always
contact our service centre.
Electrical safety:
Caution: to avoid accidents
and injuries from electric
shocks:
•
The equipment is not to be op-
erated if there are people in the
water. There is a risk of electric
shock.
•
After erection, the mains plug
must be freely accessible when
the equipment is in operation.
•
Before operating your new
pump, have a specialist check:
- The earthing, the protective
multiple earthing; the re-
sidual current circuit break-
ing must be compliant with
the safety regulations of the
energy supply company and
function without fault,
- The protection of the electri-
cal plug connections from
the wet.
•
If there is a risk of flooding, fix
the plug connections in an area
that is safe from flooding.
Publicidad
