Publicidad
2. An Aqara Zigbee hub is required. Please make sure
you have an Aqara Zigbee hub installed and added to
the Aqara Home app.
3. Open the battery cover with the ejector tool.
4. Open the app, click "+" in the upper right corner of the
home page to enter the "Add Accessory" page, select
"Cube T1 Pro", select the hub to be connected,
operate according to the instructions on the app, and
then long press the device reset button for 5 seconds,
waiting for the hub to indicate that the connection is
successful.
5. For more information, please visit: aqara.com/support.
* If the device fails to be added, please move the device close to the hub
and try again.
* Quickly press the reset button once, or pick up the Cube and shake it
with force. If the hub gives a prompt sound, it indicates that the device
can communicate effectively with the hub.
* Different hubs give the prompt of successful connection in different
ways. Please refer to the introduction of the hub.
03
Publicidad
