Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Default setting:
Temperature: target temperature is 0ºC. You may reset the temperature between 0ºC and 35ºC.
Time: working time is 2 minutes and 30 seconds.
Speed: working speed is 03.
Tips: Sound "Beep" will be heard after the working time is up. All the settings are cleared and the
appliance goes back to stand-by state.
4. "Temp" button:
Press "Temp" button, and then rotate knob (K1) to set temperature you need. (Temperature range: 30ºC-
140ºC)
5. "Weighting" button:
The maximum weight is 5000g. Weight range: 5-5000g.
Press "Weighting" button under stand-by state, LCD shows as "0000". And then put the food in the bowl,
read the number shown on the LCD. That is the weight of the food added. And then press "Weighting"
button again, the number on LCD will be cleared and shows as "0000".
Tips: Hold "Weighting" button longer than 2 seconds, the appliance will exit from weighting function and
go back to temperature display.
6."Pulse" button:
Rapid speed accelerating function. You may use it to mix food quickly. Hold "Pulse" button, the appliance
instantly starts to run at the highest speed 10. If you release the button, the appliance will recover the
previous working speed immediately.
Tips: When the temperature in the bowl is at or over 60°C, "Pulse" button cannot be used.
7. Knob (K1):
Rotate the knob to select the temperature/time/speed/shortcut menu you need.
8."Start/Stop" button(K2):
1) After all the settings, press "Start/Stop" button, the appliance will start to work.
2) Press "Start/Stop" button under the working state, the current working will be stopped. When you
press it again, the stopped working will be recovered.
Tips: If you press "Start/Stop" button longer than 2 seconds under any working status, the appliance will
go back to stand-by status. All your settings will be cleared.
How to use the steamer: (K)
The steamer is perfectly suited for preparing some food such as vegetables with meat, sausages,
steamed bread, steamed fish etc.
You can use the steamers in either of the following two combinations:
Combination 1: Lid (M)+ steamer (Tray) (N) + Steamer (O)
Use this combination for cooking different foods.
Combination 2: Lid (M) + Steamer (O)
Use this combination for larger amount of the same food, e.g. vegetables, potatoes or large pieces of
meat or sausages.
Please follow the steps:
1.Install the blade, and then install the bowl on the main appliance.
2.Add the water (0.5L≤water≤2L) in the bowl. (Caution: The water in the bowl should be more than
36
Publicidad
