Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Connect Exhaust Hose to the
4.
Window Panel
Place the Air Conditioner close to the window
ensuring there is at least 20" of clearance from
the wall and any other obstructions. Extend the
the Exhaust Hose Adapter into the opening in the
Window Kit and slide it into the locking position.
Ensure that the hose runs straight to the window
with no excess extension. Use the small screw to
attach the exhaust hose assembly to the window
sealing plate assembly.
Important: The Air Conditioner must be vented to
the outside. Do not use a longer hose or extend the
hose included with the Air Conditioner or the unit
will not cool properly and will overheat.
12
50cm
20"
COMPLETE INSTALLATION
5.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
1. Plug the power cord into a grounded 3
prong outlet.
2. Press the Reset button on the plug to
ensure the safety plug is providing power to
the Air Conditioner.
3. Allow 20" of clearance around the Air
Conditioner for proper air circulation
4. When removing the Air Conditioner, be sure
to remove the Window Kit.
49-5000625 Rev. 0
Publicidad
Solución de problemas
