Publicidad
Idiomas disponibles
Idiomas disponibles
14 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
14.1 Complete overview
1 motor unit
2 lid
3a blades with protection caps
3b blades withou protection caps
3c drive shaft – touch the blade here
4 glass bowl
5 antislip-ring
Warning
► The blades are very sharp, touch them
exclusively at the drive shaft.
► Keep your fingers, hair and clothing away from
the blades.
► Do not touch the blades during cleaning of the
unit.
► After use place the protection caps on the blades.
Be careful!
14.2 Rating plate
The rating plate with the connection and performance
data can be founded beneath the device.
15 Operation and Handing
This chapter provides you with important notices with
regard to operating the device. Observe the following
notices to avoid dangers and damages.
15.1 Short term operation
The device is intented only for short term opeation. Run the device in intervals of 30
seconds of operation, 2 minutes cool down time, to avoid overheating. Otherwise the
motor could be damaged. After 3 intervalls let the device cool down for 30 minutes.
15.2 Before first use
Clean the device as shown in chapter: cleaning and maintenance
► When using for the first time little smell occurs. This is harmless and disappears after a
while.
Please note
33
Publicidad
