HumanTechnik Signolux T Instrucciones De Servicio página 12

Event icons
Each event icon can be linked to a transmit-
ter (e.g. doorbell pushbutton) and can be
re-assigned at will.
The icons symbolize:
Doorbell 1
Doorbell 2
Telephone
Person call
Baby
Fire alarm
Flood alarm Colour: Blue
Alarm
Linking transmitter alerts with event icons
Up to 8 transmitters can be assigned to
each event icon. This is achieved by pair-
ing a transmitter with an icon of your choice.
Please keep in mind that a transmitter can
only be paired if it is not already stored in
the memory of the receiver. If required, you
might first have to delete the transmitter from
the memory (see "Deleting transmitters").
a) Keep the function button »
for some time. The event icons start to
light up in sequence. Let go of the button
as soon as the desired icon is lit.
b) Trigger your transmitter (e.g. operate the
doorbell pushbutton or test button).
c) Wait for about 20 seconds, then test the
function by triggering the transmitter
again.
12 English
Colour: Green
Colour: Green
Colour: Orange
Colour: Yellow
Colour: White
Colour: Red
Colour: Red
●«
(3) pressed
Setting the melody
You can freely set every provided tone to an
event icon of your choice. The mode selector
switch must be either set to 0 or 1.
a) First trigger an alert (e.g. operate doorbell
pushbutton).
b) The icon assigned to the transmitter lights
up and the previously chosen tone
should be heard.
c) Press and hold the melody setting but-
ton »♫« (5) for two seconds.
Let go of the button and press it repeat-
edly until you have found the desired
melody (you can choose from 16 different
tones).
d) Once the icon ceases to flash, the se-
lected tone has been set.
Deleting transmitters
Do the following if you wish to delete a trans-
mitter from the device memory:
a) Keep the function button »
pressed for some time. The event icons
start to light up in sequence. Let go of
the button as soon as the icon in question
is lit.
b) Now press the function button »●« and
the melody button »♫« (3)+(5) at the
same time. All icons briefly light up and
the transmitter is deleted from that icon.
Please note:
This procedure will delete all transmitters
assigned to this event icon.
●«
(3)