Publicidad
Battery installation method
●Confirm that the toy's power is turned off.
●Locate the battery cover on the bottom of the toy
and loosen the screw with a screwdriver.
●According to the instructions in the battery box,
install 3 new 1.5V "AA" batteries into the toys.
(Recommended to use a new alkaline battery to get
the best performance from the product).
●Replace the battery cover and tighten the screws.
Battery Notices
●The plush hand drum toys uses 3 x 1.5V "AA"
non-rechargeable batteries,
●The battery should be taken out and loaded in
accordance with the polarity and voltage signs on the
toy battery box. The battery should not be
short-circuited.
●Non-rechargeable batteries cannot be charged.
●Different types of batteries or old and new batteries
cannot be mixed to use.
●Only the same or equivalent battery as the
recommended battery can be used.
Powered by 3 x "AA"batteries
(Not included in the package)
7
Publicidad
