Bugatti JACQUELINE Instrucciones Para El Uso página 22

Advice and reccomendations on use Advice and reccomendations on use
11
12
14
15
16
9
3) WATER LEVEL INDICATION (12)
a) no water in kettle: digits show temperature (6 seconds) and the word "ADD" (3 seconds). It means that
water need to be added
b) Water level: each single line of the DOT icon (12) corresponds to 100 ml (0,1 L-3,52 fl.oz) . When 100 ml
(0,1 L-3,52 fl.oz) are poured in kettle one line of the DOT (12) is illuminated and blinks. Filling the kettle
from 200ml up to 1200 ml, the lines of the DOT (12) illuminate raw by raw and are steady. When water is
over 1,2 liters / 40.58 US fl.oz / 42.23 UK fl.oz , the digits (11) show the water temperature (6 seconds) and
the word "MAX" (3 seconds) indicating there is too much water inside the kettle. A
OPERATE WHEN KETTLE IS OVERFILLED WITH MORE THAN 1200 ML OF WATER: DURING HEATING
YOU MAY HAVE HOT WATER SPLASHED FROM THE SPOUT. DANGER OF BURN.
19
1) CONNECT THE BASE (5) TO POWER SOCKET
a) WARNING: Make sure that the electric socket that you are using is suitably
earthed. Never allow parts carrying live voltage to come into contact with
10
water: it may cause a short circuit!!! (follow all the safety instructions specified
before). To disconnect, make sure that the kettle is not running. Do not unplug
the kettle from the wall outlet by pulling on the cord. Always unplug the ap-
pliance by holding the plug (6). To switch off the device completely, the plug (6)
has to be removed from the socket.
b)When the plug (6) of the power base (5) is inserted into the socket, the base
(5)will emit one bip. Before to place the kettle on power base wait for 10 sec.
If kettle is placed on the power base before 10 sec. the display will show UP:
kettle must be removed from the power base for around 10 sec.
c) When kettle is placed on the power base (5), the display switches on showing:
- the unit of measure of the temperature (10) in °C or °F,
- the digits (11) indicating the real temperature of the water (for 6 seconds) the
13
water quantity in liters (for 3 seconds)
- the water level DOT with lines (12): each line corresponds to 0,1 Lt (3,52 oz)
- BChef APP icon (13) in red steady colour
- Timer and Schedule icon (14) OFF
- Bluetooth icon (15) blinking
- On/off icon (16) OFF.
2) SELECTION OF THE UNIT OF MEASURE OF THE TEMPERATURE
Kettle display can show the temperature in °C ( Celsius Degree) or °F ( Fahren-
heit Degree). To select the different unit of measure simply double click/press
the on/off button (9) . The icon °C or °F will illuminate accordingly.
TTENTION: NEVER