Changing The Light; Care And Maintenance - TCL RP631SSE0 Instrucciones De Funcionamiento

Operation keys
-- Water dispenser: The users can take the drinking water through the
equipment at any time according to the own needs,
- Water taking: When the users want to drink water, they need to press
(extrude) the water-taking handle or use the rigid container to press
(extrude) the water-taking handle until the water outlet flows the water
and after meeting the needs. After taking water, stop pressing(extruding) ,
release the water-taking handle, and the water stops flowing.
★★ Warm prompt:
Before taking water, please ensure the water storage box has enough
drinking water;
Please ensure the water quality in the water storage box is better without
impurities and foreign matters, etc., to avoid blocking the water outlet.
The users are suggested to use 2.5L of drinking water at least in one week to ensure the
fresh water source in the water way system.
When taking water, it is suggested to close the door with water dispenser to avoid the shaking
of refrigerator door, sprinkling of water and other accidents in the process of taking water.
Due to the different areas and seasons, as well as the instability of indoor environment
temperature and humidity, it is the normal phenomenon if the water dispenser has water
droplets and condensation in other places except for the water outlet. Please wipe it with
towel and duster cloth, will not affect the usage.

Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the
manufacturer or its service agent or related technical person.

Care and maintenance

It is suggested to maintain the refrigerator once per month;
--Unplug the power plug to prevent from electric shock;
--Use wet cloth or neutral detergent (cleanser essence) to wipe off
the oil contamination and other dirt. Then completely wipe off the
detergent.
--Do not use alkaline detergent, soap powder, gasoline and
alcohol, talcum powder etc.; otherwise the coats or plastics may
be damaged;
--Regularly clean the refrigerator body and clear the ground dusts
to keep the refrigerator clean.
Inspections after maintenance:
1. Whether there are damages to the power line and plug; 2.
Whether there are dusts on the power plug; 3. Whether there is
abnormal heat on the plug; 4. Whether the socket is loose; 5.
Whether the plug is totally inserted.
Note:
If the power line and plug is damaged and there exist dusts,
electric shock or fire may occur;
After unplugging the plug, 5 minutes must pass before re-plugging
it;
Do not put your hands under the refrigerator to avoid getting hurt.
13
Water-taki n g handl e
Unplug the refrigerator
plug before cleaning
Please use neutral
detergent
EN