Permobil SpeedControl Instrucciones De Instalación página 5

Option B: Attachment with arm
1. Slide the square head bolt through the hole in the
arm attachment bracket.
2. If using rubber insert #22, #25 or #28, place the
rubber insert onto the frame tube and place the
clamp onto the rubber insert. Then skip to 4.
3. If using rubber insert #32, place into the clamp. Hold
in place onto the tube.
4. Hook the top of the arm assembly onto the clamp.
Pinch the clamp and housing together to force the
clamp over the bolt end.
5. Finger tighten the hex nut onto the bolt.
6. Tighten until the arm assembly is secure, using the
provided external hex wrench tool or a flathead
screwdriver. When properly secured, the arm
assembly will not rotate.
EN - SpeedControl Installation Instructions
1
4
5
- 5
2
6
3